Canon PIXMA MX532 Getting Started Guide - Page 207
Printing Out Network Setting Information
View all Canon PIXMA MX532 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 207 highlights
Printing Out Network Setting Information You can print out the network settings of the machine such as its IP address and SSID. Important • This print out contains valuable information about your computer. Handle it with care. 1. Make sure that the machine is turned on. 2. Load a sheet of A4 or Letter-sized plain paper. 3. Press the Setup button. The Setup menu screen is displayed. 4. Use the button to select Device settings, then press the OK button. 5. Use the button to select LAN settings, then press the OK button. 6. Use the button to select Print LAN details, then press the OK button. The machine starts printing the network setting information. The following information on the machine's network setting is printed out. Item Explanations of the item Setting Wireless LAN Wireless LAN Enable/Disable Connection Status of the Wireless LAN Active/Inactive MAC Address MAC Address XX:XX:XX:XX:XX:XX SSID SSID SSID of the wireless LAN Communication Mode Communication Mode Infrastructure Channel Channel XX (1 to 13) Encryption Method of the Encryption none/WEP/TKIP/AES WEP Key Length WEP Key Length Inactive/128/64 Authentication Method of the Authentication none/auto/open/shared/WPA-PSK/WPA2-PSK Signal Strength Signal Strength 0 to 100 [%] TCP/IP Version TCP/IP Version IPv4 & IPv6/IPv4 IPv4 IP Address Selected IP Address (IPv4) XXX.XXX.XXX.XXX IPv4 Default Gateway Default Gateway (IPv4) XXX.XXX.XXX.XXX Subnet Mask Subnet Mask XXX.XXX.XXX.XXX 207