Canon PIXMA MX532 Getting Started Guide - Page 249
Edit Accessible IP Address Screen/Add Accessible IP Address, Screen
View all Canon PIXMA MX532 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 249 highlights
Edit Accessible IP Address Screen/Add Accessible IP Address Screen Note • This screen is not available depending on the printer you are using. The example screenshots in this section refer to the Add Accessible IP Address Screen. 1. Specification Method: Select either Single Address Specification or Range Specification to add the IP address(es). Single Address Specification Specify each IP address separately. Range Specification Specify a range of successive IP addresses. 2. IP Address: Enter the IP address of a computer or a network device to allow access when you selected Single Address Specification in Specification Method:. An IP address is expressed as four values ranging from 0 to 255. Start IP Address: Enter the first IP address in the range of addresses of the computers or network devices to allow access when you selected Range Specification in Specification Method:. An IP address is expressed as four values ranging from 0 to 255. End IP Address: Enter the last IP address in the range of addresses of the computers or network devices to allow access when you selected Range Specification in Specification Method:. An IP address is expressed as four values ranging from 0 to 255. Note • The Start IP Address: must be a smaller value than the End IP Address:. 3. Comment: Optionally enter any information to identify the device, such as the name of the computer. Important • Comments will be displayed only on the computer used to enter them. 249