Canon imageFORMULA DR-2510M Workgroup Scanner User Manual - Page 102
Attaching the Feeding Roller, Insert the feeding roller into the slot inside the roller cover
View all Canon imageFORMULA DR-2510M Workgroup Scanner manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 102 highlights
3 Open the roller cover on the main unit by placing your fingers in the grooves and pulling it down. Contents Back Previous Page Next Page Attaching the Feeding Roller 1 Insert the feeding roller into the slot inside the roller cover, and align the notch on the roller with the shaft on the main unit. 4 Lift up the roller fixing lever (c), and slide it to the left (d). 2 Slide the roller fixing lever to the right to lock the roller into the hole on the left of the feeding roller. 5 Remove the feeding roller by moving it to the left to detach it from its shaft, and pull it out of the slot. 3 Push down the lever to lock the shaft of the feeding roller into place. 102
Back
Previous Page
Next Page
Contents
102
3
Open the roller cover on the main unit by placing your fingers in the
grooves and pulling it down.
4
Lift up the roller fixing lever (
), and slide it to the left (
).
5
Remove the feeding roller by moving it to the left to detach it from its shaft,
and pull it out of the slot.
Attaching the Feeding Roller
1
Insert the feeding roller into the slot inside the roller cover, and align the
notch on the roller with the shaft on the main unit.
2
Slide the roller fixing lever to the right to lock the roller into the hole on the
left of the feeding roller.
3
Push down the lever to lock the shaft of the feeding roller into place.