Canon imageFORMULA DR-2510M Workgroup Scanner User Manual - Page 104
Attaching the Retard Roller, Insert the retard roller into the slot inside the roller cover
View all Canon imageFORMULA DR-2510M Workgroup Scanner manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 104 highlights
3 Grasp the ends of the roller cover inside the front unit and pull it down to open it. Contents Back Previous Page Next Page Attaching the Retard Roller 1 Insert the retard roller into the slot inside the roller cover, and align the notch on the roller with the shaft on the front unit. 4 Lift up the roller fixing lever (c), and slide it to the right (d). 2 Slide the roller fixing lever to the left to lock the roller into the hole on the left of the retard roller. 5 Remove the retard roller by moving it to the right to detach it from its shaft, and pull it out. 3 Push down the lever to lock the shaft of the feeding roller into place. 104
Back
Previous Page
Next Page
Contents
104
3
Grasp the ends of the roller cover inside the front unit and pull it down to
open it.
4
Lift up the roller fixing lever (
), and slide it to the right (
).
5
Remove the retard roller by moving it to the right to detach it from its shaft,
and pull it out.
Attaching the Retard Roller
1
Insert the retard roller into the slot inside the roller cover, and align the
notch on the roller with the shaft on the front unit.
2
Slide the roller fixing lever to the left to lock the roller into the hole on the
left of the retard roller.
3
Push down the lever to lock the shaft of the feeding roller into place.