Cisco CP-7931G User Guide - Page 12
Adjusting the Handset Rest, Registering with TAPS, DC Adaptor port DC48V optional
View all Cisco CP-7931G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
1 DC Adaptor port (DC48V) (optional) 2 Network port (10/100 SW) 3 Access port (10/100 PC) 4 Headset port 5 Handset port Adjusting the Handset Rest When you connect your phone, you may want to adjust the handset rest to ensure that the receiver will not slip out of the cradle. See the table below for instructions. 1 2 3 77354 1 Set the handset aside and pull the square plastic tab from the handset rest. 2 Rotate the tab 180 degrees. 3 Slide the tab back into the handset rest. An extension protrudes from the top of the rotated tab. Return the handset to the handset rest. Registering with TAPS After your phone is connected to the network, your system administrator may ask you to auto-register your phone using TAPS (Tool for Auto-Registered Phones Support). TAPS can be used either for a new phone or to replace an existing phone. To register with TAPS, pick up the handset, enter the TAPS extension provided by your system administrator, and follow the voice prompts. You may need to enter your entire extension, including the area code. After your phone displays a confirmation message, hang up. The phone will re-start. 6 OL-22334-01