Compaq Deskpro 2000 Compaq Deskpro 2000 Series of Personal Computers Pentium P - Page 113
System Board Graphics Memory, Module Upgrade
![]() |
View all Compaq Deskpro 2000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 113 highlights
5.9.2 System Board Graphics Memory Module Upgrade To install a graphics memory module upgrade for the graphics controller that is preinstalled in the system board, complete the following steps: 1. Remove the system unit cover (Section 5.6). 2. Remove any outboard expansion boards that might block access to the memory connectors (Section 5.8.2). 3. Install the graphics memory upgrade module onto the system board. Figure 5-11. Installing the Graphics Memory Upgrade Module on the Pentium System Board Figure 5-12. Installing the Graphics Memory Upgrade Module on the Pentium II System Board 4. Replace any outboard expansion boards that were removed. 5. Replace the system unit cover. Compaq Deskpro 2000 Series of Personal Computers 5-13
![](/manual_guide/products/compaq-280100002-compaq-deskpro-2000-series-personal-computers-pentium-processor-mmx-technology-pentium-ii-processor-1a549f2/113.png)
Compaq Deskpro 2000 Series of Personal Computers
5-13
5.9.2
System Board Graphics Memory
Module Upgrade
To install a graphics memory module upgrade for the graphics controller that is preinstalled in the
system board, complete the following steps:
1.
Remove the system unit cover (Section 5.6).
2.
Remove any outboard expansion boards that might block access to the memory connectors
(Section 5.8.2).
3.
Install the graphics memory upgrade module onto the system board.
Figure 5-11.
Installing the Graphics Memory Upgrade Module on the Pentium System Board
Figure 5-12.
Installing the Graphics Memory Upgrade Module on the Pentium II System Board
4.
Replace any outboard expansion boards that were removed.
5.
Replace the system unit cover.