Compaq Deskpro 2000 Compaq Deskpro 2000 Series of Personal Computers Pentium P - Page 160
Installing the Graphics Memory Upgrade Module on the Pentium System Board,
![]() |
View all Compaq Deskpro 2000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 160 highlights
6.12.4 System Board Graphics Memory Module Upgrade To install a graphics memory module upgrade for the graphics controller that is preinstalled in the system board, complete the following steps: 1. Remove the access panel (Section 6.6.1). 2. Remove the riser brace (Section 6.7). 3. Install the graphics memory upgrade module onto the system board. Figure 6-17. Installing the Graphics Memory Upgrade Module on the Pentium System Board Figure 6-18. Installing the Graphics Memory Upgrade Module on the Pentium II System Board 4. Replace the riser brace and access panel. 5. Turn the computer on and start Windows 95. 6-18 Removal and Replacement Procedures - Minitower
![](/manual_guide/products/compaq-280100002-compaq-deskpro-2000-series-personal-computers-pentium-processor-mmx-technology-pentium-ii-processor-1a549f2/160.png)
6-18
Removal and Replacement Procedures - Minitower
6.12.4
System Board Graphics Memory
Module Upgrade
To install a graphics memory module upgrade for the graphics controller that is preinstalled in the
system board, complete the following steps:
1.
Remove the access panel (Section 6.6.1).
2.
Remove the riser brace (Section 6.7).
3.
Install the graphics memory upgrade module onto the system board.
Figure 6-17.
Installing the Graphics Memory Upgrade Module on the Pentium System Board
Figure 6-18.
Installing the Graphics Memory Upgrade Module on the Pentium II System Board
4.
Replace the riser brace and access panel.
5.
Turn the computer on and start Windows 95.