Compaq Deskpro 2000 Compaq Deskpro 2000 Series of Personal Computers Pentium P - Page 135
Installing the Hard Drive into the Mounting Bracket
![]() |
View all Compaq Deskpro 2000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 135 highlights
If you are installing a 3.5-inch diskette drive into a 5.25-inch drive bay, use Compaq bracket spare part number 243230-001, which comes with a preinstalled bezel. If you are installing a 3.5-inch hard drive into a 5.25-inch drive bay, use Compaq bracket spare part number 243231-001. To install a 3.5-inch drive/bracket assembly, begin with step 1. To install a 5.25-inch drive, begin with step 3. 1. Place the 3.5-inch drive into the bracket. 2. Insert two screws into the bracket holes on each side of the bracket to secure the drive. Figure 5-33. Installing the Hard Drive into the Mounting Bracket CAUTION: Use only 3/16-inch or 5-mm long screws as guide screws. Longer screws can damage the internal components of the drive. 3. Install one wafer screw on the left side of the drive or bracket assembly. This acts as a guide rail to align the bracket in the drive bay. Figure 5-34. Inserting the Wafer Screw on the Left Side of the Bracket Compaq Deskpro 2000 Series of Personal Computers 5-35
![](/manual_guide/products/compaq-280100002-compaq-deskpro-2000-series-personal-computers-pentium-processor-mmx-technology-pentium-ii-processor-1a549f2/135.png)