Compaq Deskpro 2000 Compaq Deskpro 2000 Series of Personal Computers Pentium P - Page 190
Setting Power-On Password Jumpers, Password Header E6 Location, Pentium System Board
![]() |
View all Compaq Deskpro 2000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 190 highlights
7.2.1 Setting Power-On Password Jumpers The power-on password feature is enabled or disabled by moving the jumper on the password header located on the system board. The password header is labeled "E6 Password" on the Pentium system board and labeled "Password" on the Pentium II system board. The password header has three pins. The power-on password comes enabled by default with the jumper on pins 5 and 6. To clear or disable the power-on password, move the jumper to pins 6 and 7. Figure 7-5. Password Header (E6) Location, Pentium System Board Figure 7-6. Password Header Location, Pentium II System Board To set a new password, move the password header back to pins 5 and 6, restart the computer, and reestablish your password through Security Management. Compaq Deskpro 2000 Series of Personal Computers 7-7
![](/manual_guide/products/compaq-280100002-compaq-deskpro-2000-series-personal-computers-pentium-processor-mmx-technology-pentium-ii-processor-1a549f2/190.png)