Compaq Deskpro 2000 Compaq Deskpro 2000 Series of Personal Computers Pentium P - Page 125
Bezel Blank,
![]() |
View all Compaq Deskpro 2000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 125 highlights
5.14.3 Bezel Blank To remove a bezel blank, complete the following steps: 1. Remove the system unit cover (Section 5.6). 2. Remove the front bezel (Section 5.14.1). 3. Lay the front bezel face down on a protected work surface. Push the tab that is on the right of the bezel blank to the right. 4. Rotate the bezel blank up and out of the front bezel. Figure 5-23. Removing the Bezel Blank To reinstall the bezel blank, reverse the above procedure. Compaq Deskpro 2000 Series of Personal Computers 5-25
![](/manual_guide/products/compaq-280100002-compaq-deskpro-2000-series-personal-computers-pentium-processor-mmx-technology-pentium-ii-processor-1a549f2/125.png)
Compaq Deskpro 2000 Series of Personal Computers
5-25
5.14.3 Bezel Blank
To remove a bezel blank, complete the following steps:
1.
Remove the system unit cover (Section 5.6).
2.
Remove the front bezel (Section 5.14.1).
3.
Lay the front bezel face down on a protected work surface. Push the tab that is on the right of the
bezel blank to the right.
4.
Rotate the bezel blank up and out of the front bezel.
Figure 5-23.
Removing the Bezel Blank
To reinstall the bezel blank, reverse the above procedure.