Compaq Deskpro 2000 Compaq Deskpro 2000 Series of Personal Computers Pentium P - Page 150
Expansion Board, Remove the access panel
View all Compaq Deskpro 2000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 150 highlights
6.8 Expansion Board The Compaq Deskpro 2000 Series of Personal Computers contains five expansion slots on the expansion board. 1 Two dedicated PCI expansion slots 2 One PCI/ISA shared expansion slot 3 Two dedicated ISA expansion slots Figure 6-7. Five Expansion Slots on the Riser Board To remove an expansion board, complete the following steps: 1. Remove the access panel (Section 6.6.1). 2. Disconnect any cables attached to the expansion board. 3. Remove the riser brace (Section 6.7). 6-8 Removal and Replacement Procedures - Minitower
6-8
Removal and Replacement Procedures - Minitower
6.8 Expansion Board
The Compaq Deskpro 2000 Series of Personal Computers contains five expansion slots on the
expansion board.
1
Two dedicated PCI expansion slots
2
One PCI/ISA shared expansion slot
3
Two dedicated ISA expansion slots
Figure 6-7.
Five Expansion Slots on the Riser Board
To remove an expansion board, complete the following steps:
1.
Remove the access panel (Section 6.6.1).
2.
Disconnect any cables attached to the expansion board.
3.
Remove the riser brace (Section 6.7).