Compaq Deskpro 2000 Compaq Deskpro 2000 Series of Personal Computers Pentium P - Page 236
Table E-9, Hard Drive Test Error Codes, Error, Description, Recommended Action
View all Compaq Deskpro 2000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 236 highlights
Table E-9 Hard Drive Test Error Codes Error Code Description Recommended Action 1701-xx Hard drive format test failed. The following steps apply to error codes 1701-xx through 1736-xx: 1702-xx Hard drive read test failed. 1. Run Computer Setup and verify drive type. 1703-xx Hard drive write/read/compare test failed. 2. Replace the hard drive signal and power cables and retest. 1704-xx Hard drive random seek test failed. 3. Replace the hard drive and retest. 1705-xx Hard drive controller test failed. 4. Replace the system board and retest. 1708-xx Hard drive format bad track test failed. 1710-xx Hard drive park head test failed. 1715-xx Hard drive head select test failed. 1716-xx Hard drive conditional format test failed. 1717-xx Hard drive ECC* test failed. 1719-xx Hard drive power mode test failed. 1724-xx 1736-xx Hard drive network preparation test failed. Hard drive monitoring test failed. *Error Correction Code. Error Code 1900-xx 1901-xx 1902-xx 1903-xx 1904-xx 1905-xx 1906-xx 1910-xx Table E-10 Tape Drive Test Error Codes Description Tape drive ID test failed. Tape drive servo test failed. Tape drive format or format verification test failed. Tape drive sensor test failed. Tape drive BOT/EOT test failed. Tape drive read test failed. Tape drive write/read/compare failed. Tape erase test failed. Recommended Action The following steps apply to error codes 1900-xx through 1910-xx: 1. Replace the tape cartridge and retest. 2. Check and/or replace the signal cable and retest. 3. Check the switch settings on the adapter board (if applicable). 4. Replace the tape adapter board (if applicable) and retest. 5. Replace the tape drive and retest. 6. Replace the system board and retest. Compaq Deskpro 2000 Series of Personal Computers E-5