Compaq Deskpro 2000 Compaq Deskpro 2000 Series of Personal Computers Pentium P - Page 240
SCSI Error Codes, Table E-16, SCSI Device Names
View all Compaq Deskpro 2000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 240 highlights
SCSI Error Codes This section includes the error codes for the following SCSI devices: s Hard drives s CD-ROM drives s Tape drives s PD-CD drives The SCSI error codes are written in the format AABB-CC and can be determined by looking up the respective parts of the code in the three corresponding tables numbered D-16, D-17, and D-18. AA (Table E-16) identifies the drive type being tested. BB (Table E-17) identifies the type of test. CC (Table E-18) identifies the exact error received. For example, if you received a diagnostic error code of 6523-05, you would look at Table E-16 to identify the meaning of the first two numbers, 65. This indicates a hard drive problem. The second set of two numbers, 23, refers to a random read, as shown in Table E-17. The last two numbers, 05, indicate a seek failure, as listed in Table E-18. When you combine this information, you know that the diagnostics program was testing the random-read functioning of the hard drive and received a seek failure. The device is faulty and must be replaced. 65XX-XX 66XX-XX 67XX-XX XX00-XX XX05-XX XX06-XX XX08-XX XX09-XX XX23-XX XX28-XX Table E-16 SCSI Device Names Hard drive CD-ROM Drive and PD-CD drive Tape drive Table E-17 SCSI Test Names ID Read SA/Media Controller Media erase Random read Media load/unload Compaq Deskpro 2000 Series of Personal Computers E-9