Compaq Deskpro 2000 Compaq Deskpro 2000 Series of Personal Computers Pentium P - Page 39
COMPAQ UTILITIES, 2.1 Getting Ready
![]() |
View all Compaq Deskpro 2000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 39 highlights
2 chapter COMPAQ UTILITIES This chapter contains descriptions of Compaq utilities that can be helpful when servicing the Compaq Deskpro 2000 Series of Personal Computer. These utilities include: s Configuration and Diagnostics s ROMPaq s Compaq Intelligent Manageability s Compaq Insight Manager s Prefailure Warranty See Appendices E, F, and G for error codes, error messages, and other troubleshooting techniques. The Configuration and Diagnostics utilities are located on a hard disk partition on the computer. These utilities include Create a Diagnostics Diskette, Setup, TEST, and INSPECT. You can run Configuration and Diagnostics from diskette, or use the Support Software CD to install a system partition containing Configuration and Diagnostics utilities. Use the Compaq Configuration and Diagnostics utilities in the following instances: s When a system configuration error is detected during the Power-On Self-Test (POST). s To change factory default settings for some of the computer features. s To change the system configuration, which is sometimes necessary when you add or remove optional hardware. s To set system configuration features. 2.1 Getting Ready 2.1.1 Preparing the Computer If you encounter an error condition, complete the following steps before starting problem isolation procedures: 1. Ensure proper ventilation. The computer should have a 3-inch (7.6-cm) clearance at the front and back of the system unit. 2. Turn off the computer and peripheral devices. Compaq Deskpro 2000 Series of Personal Computers 2-1
![](/manual_guide/products/compaq-280100002-compaq-deskpro-2000-series-personal-computers-pentium-processor-mmx-technology-pentium-ii-processor-1a549f2/39.png)