D-Link DSR-1000AC Emulator - Page 102

8.18 system snmp sys configure S.No 1 2 3 4 5 6 Command Name Description save Saves SNMP system configuration settings. cancel To revert to the previous snmp configuration settings. Saves SNMP system exit configuration settings and exit current mode. sys-contact Sets system contact information. sys-location Sets system location information. sys-name Sets system name information. Type and Description String, Max 32 characters and no ' or empty space or". String, Max 32 characters and no ' or empty space or". String, Max 32 characters and no ' or empty space or ". 8.19 system snmp access add S.No Command Name Description Type and Description 1 save Saves SNMP access control configuration settings. Saves SNMP access 2 exit configuration settings and exit current mode. To revert to the previous 3 cancel snmp configuration settings. 4 agent The IP address of the SNMP agent. IP address AAA.BBB.CCC.DDD where each part is in the range 0-255. 5 subnet_mask The network mask used to determine the list of allowed SNMP managers. To allow any IP on the network to manager the IP address device enter AAA.BBB.CCC.DDD where 255.255.255.0. For a each part is in the range 0-255. specific host, enter 255.255.255.255. To allow global access, enter 0.0.0.0. 6 accessType SNMP trap port the trap messages will be sent to. String 102