D-Link DSR-1000AC Emulator - Page 131
net ipv6_tunnel isatap add, net ipv6_tunnel isatap edit
View all D-Link DSR-1000AC manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 131 highlights
11.27 net ipv6_tunnel isatap add S.No Command Name Description Type and Description 1 save Saves isatap tunnel configuration settings. 2 exit Saves isaptap tunnel configuration settings, and exit current mode. To revert to the previous 3 cancel isatap tunnel configuration settings. This is the 64-bit subnet 4 subnet_prefix prefix that is assigned to the logical ISATAP subnet String for this intranet. This is the endpoint address for the tunnel that starts with this router. The 5 end_point_type endpoint can be the LAN Select the local end point interface (assuming the address type. LAN is an IPv4 network), or a specific LAN IPv4 address. The local end point address IP address 6 ipv4_address if not the LAN IPv4 AAA.BBB.CCC.DDD where address. each part is in the range 0-255. 11.28 net ipv6_tunnel isatap edit S.No Command Name Description Type and Description 1 Isatap mode. Tunnel configuration Unsigned integer 2 save Saves isatap tunnel configuration settings. Saves isaptap tunnel 3 exit configuration settings and exit current mode. 4 cancel To revert to the previous isatap tunnel configuration settings. 5 subnet_prefix This is the 64-bit subnet prefix that is assigned to the logical ISATAP subnet String for this intranet. 131