D-Link DSR-1000AC Emulator - Page 20
RogueAP Enabled, Radio Settings Radio, Card Name, Current Channel, TX Power, RX Diversity, AP Name,
![]() |
View all D-Link DSR-1000AC manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 20 highlights
mapped to. RogueAP Enabled: If this field has value 'Y' it indicates that RogueAP detection is enabled on this radio. If it is 'N' it indicates that RogueAP detection is disabled on this radio. If the optional argument radioNum is given, the following cofiguration information is displayed for the given radio. Radio Settings Radio: The radio number. Card Name: This field indicates which card the radio is using. Path: This field indicates which path the radio is mapped to. Current Channel: The channel used by the radio. RogueAP Enabled: If this field has the value 'Yes', it indicates that RogueAP detection is enabled on this radio. TX Power: Value in dBm is the default transmitted power level for all APs that use this radio. RX Diversity: Enable receive diversity (use multiple antennas to receive packets) List of Access Points for Radio This table shows all the APs that are configured for a particular radio. AP Name: This is the name of the AP. BSSID: The BSSID of the AP SSID: The SSID serviced by AP Profile: This field has a brief description of the security, encryption and authentication combination assigned to the AP. The command show POP3-Settings? at the CLI prompt would give the description of all the show commands in the branch POP3-Settings, which is as follows: 1 show POP3-Settings Displays POP3 configuration. The command show POP3-Trusted-CA? at the CLI prompt would give the description of all the show commands in the branch POP3-Trusted-CA, which is as follows: 1 show POP3-Trusted-CA Displays POP3 Trusted Certificates. The command show system? at the CLI prompt would give the description of all the show commands in the branch system, which is as follows: 1 show system logging . 2 show system logging remote . 3 show setup system logging remote Displays remote logging configuration 4 show system logging facility . 5 show system logging setup facility Displays logging facility configuration 6 show system logging ipv4 . 20
![](/manual_guide/products/dlink-dsr1000ac-emulator-7214be4/20.png)