D-Link DSR-1000AC Emulator - Page 133
net wan wan1 ipv4 con
![]() |
View all D-Link DSR-1000AC manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 133 highlights
S.No Command Name Description Type and Description 9 nat_wanInterface Selects WAN which NAT is interfaces for to be enabled Select WAN interface. 11.31 net wan wan1 ipv4 configure S.No Command Name Description Type and Description 1 save Saves ipv4 wan configuration settings. 2 cancel To revert to the previous ipv4 wan configuration settings. 3 exit Exits from the current configuration. Selects among the options: STATIC, DHCP Client, PPPoE, PPTP, L2TP, 4 isp_connection_type Russian PPTP, Russian ISP Types. L2TP, Japanese Multiple PPPoE, Dual Access PPPoE 5 dhcpc If ISP Type selected is DHCPC, this field gives you options to configure DHCPC credentials Enter Yes to get dns dynamically from ISP if you have not been assigned any static IP address. The 6 dhcpc get_dns_from_isp ISP will automatically assign a DNS address to the router using DHCP Boolean choice. network protocol. Otherwise Enter No and give valid static dns addresses 7 dhcpc primary_dns Valid primary DNS Server IP Address. IP address AAA.BBB.CCC.DDD where each part is in the range 0-255. 8 dhcpc secondary_dns Valid secondary DNS Server IP Address. IP address AAA.BBB.CCC.DDD where each part is in the range 0-255. 9 dhcpc mac_type Selects the Mac Address Source. Types of mac address source. 10 dhcpc mac_address Valid MAC address. MAC address AA:BB:CC:DD:EE:FF where 133
![](/manual_guide/products/dlink-dsr1000ac-emulator-7214be4/133.png)