D-Link DSR-1000AC Emulator - Page 48
vpn l2tp client con vpn l2tp client_action, 6 vpn l2tp server con
View all D-Link DSR-1000AC manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 48 highlights
6.4 vpn l2tp client configure S.No Command Name Description Type and Description 1 save Saves l2tp client configuration settings. 2 cancel To revert to the previous settings. 3 exit Saves l2tp client configuration settings, and exit current mode. 4 enable Enables/disables L2TP client. Boolean choice IP address 5 server_address L2TP server IP address. AAA.BBB.CCC.DDD where each part is in the range 0-255 Network Address of remote IP address 6 remote_network network which is local to AAA.BBB.CCC.DDD where L2TP Server. each part is in the range 0-255 7 remote_subnet Remote Network Subnet Mask. number in range of 1 to 32 8 username Username allocated to L2TP client to connect to String L2TP server. 9 password Password allocated to client. String 10 mppe_enable Enables mppe encryption. Boolean choice 11 reconnect_mode Selects reconnect mode. Reconnect Mode type 12 time_out If there is no traffic from a user for more than the Radius client authentication specified time out, the timeout Type. connection is disconnected. 6.5 vpn l2tp client_action S.No Command Name Description Type and Description 1 Vpn l2tp client action set. Reconnect Mode type 6.6 vpn l2tp server configure S.No Command Name Description 1 save Saves l2tp server configuration settings. Type and Description 48