D-Link DSR-1000AC Emulator - Page 50

6.7 vpn openvpn config S.No Command Name Description Type and Description 1 save Saves openvpn configuration settings. 2 cancel To revert to previous settings openvpn configuration settings 3 exit Saves openvpn configuration settings, and exit current mode. 4 enable Enables/disables openvpn client/server. Boolean choice 5 mode OpenVPN daemon mode. It can run in server mode, client mode or access OpenVPN daemon mode. server client mode 6 server_identifier_typ OpenVPN server identifier e type. OpenVPN server identifier type 7 server_ip OpenVPN server IP address/FQDN to which the client connect. 8 server_ip ip_address OpenVPN server IP IPV4 or IPv6 address address to which the client depending upon protocol connect. selected IPV4 or IPV6 9 server_ip fqdn OpenVPN server FQDN to which the client connect. String 10 vpn_network Address of the Virtual Network. IP address AAA.BBB.CCC.DDD where each part is in the range 0-255 11 vpn_netmask Netmask of the Virtual Network. IP address AAA.BBB.CCC.DDD where each part is in the range 0-255 12 port The port number on which openvpn server (or Access Port number Server) runs. 13 tunnel_protocol The protocol used to communicate with the remote host. E.g.TCP, UDP. UDP is the default. The protocol used to communicate with the remote host The cipher with which the 14 encription_algorithm packets are encrypted. E.g. BF-CBC, AES-128, AES192 and AES-256. BF-CBC The cipher with which the packets are encrypted is the default 15 hash_algorithm Message digest algorithm Message digest algorithm used used to to authenticate packets. 50