D-Link DSR-1000AC Emulator - Page 23
Server IP, Server Port, Timeout, Retries, Secret
![]() |
View all D-Link DSR-1000AC manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 23 highlights
displays the list of all configured RADIUS servers. If the optional argument ServerIP is specified, detailed configuration of the RADIUS server is displayed. Server IP: IP address of RADIUS authentication server Accounting Server IP: IP address of RADIUS accounting server Server Port: RADIUS authentication server port to send the RADIUS messages. Timeout: The time (in seconds) the device waits for a response from the RADIUS server Retries: The number of tries the router will make to the RADIUS server before giving up. Secret: RADIUS server secret. This field is only displayed if the argument ServerIP is specified. The command show net? At the CLI prompt would give the description of all the show commands in the branch net, which is as follows: 1 show net ipv6_tunnel status Displays ipv6 tunnels status 2 show net bandwidth . 3 show net bandwidth profile . 4 show net bandwidth profile setup Displays list of Available Bandwidth Profile(s). 5 show net bandwidth traffic_selector . 6 show net bandwidth traffic_selector setup Shows the list of Available Traffic Selector(s). 7 show net bandwidth profile Displays the list of interface for Inbound interface_list Bandwidth Profile. It includes Available VLANs 8 show net bandwidth traffic_selector services Displays a list of available services 9 show net ddns . 10 show net ddns setup Show Dynamic DNS Configuration. 11 show net lan dhcp . 12 show net lan dhcp reserved_ip . 13 show net lan dhcp reserved_ip setup Shows a list of DHCP Reserved Addresses. 14 show net lan dhcp leased_clients . 15 show net lan dhcp leased_clients list Shows a list of Available DHCP Leased Clients. 16 show net dmz . 17 show net dmz setup Shows DMZ Configuration. 18 show net dmz dhcp . 23
![](/manual_guide/products/dlink-dsr1000ac-emulator-7214be4/23.png)