D-Link DSR-1000AC Emulator - Page 148

S.No Command Name Description Type and Description each part is in the range 00FF. 37 pptp If ISP Type selected is PPTP, this field gives you options to configure PPTP credentials. 38 pptp username Enter the username to log String, Max 64 characters and in. no ' or empty space or " 39 pptp password Enter the password to log String, Max 16 characters and in. no ' or empty space or " 40 pptp Enter the MMPE mmpe_encryption Encryption. Boolean choice. 41 pptp split_tunnel Selects the split_tunnel. Boolean choice. Gateway assigned by the IP address 42 pptp gateway ISP to make a connection AAA.BBB.CCC.DDD where with the ISP server. each part is in the range 0-255. 43 pptp server_address IP address of the PPTP server (if applicable). IP address AAA.BBB.CCC.DDD where each part is in the range 0-255. 44 pptp connectivity_type Sets the ISP Type. ISP Connectivity Types. 45 pptp idle_time Sets the ISP Type. Idle timeout value type. 46 pptp ip_address If Address Mode is Static, give static ip. IP address AAA.BBB.CCC.DDD where each part is in the range 0-255. 47 pptp subnet_mask If Address Mode is Static, give subnet mask. IP address AAA.BBB.CCC.DDD where each part is in the range 0-255. Enter Yes to get IP dynamically from ISP if you 48 pptp get_ip_from_isp have not been assigned any static IP address. Boolean choice Otherwise Enter No and give valid static IP address. Enter Yes to get dns dynamically from ISP if you have not been assigned any static IP address. The 49 pptp get_dns_from_isp ISP will automatically assign a DNS address to the router using PPTP Boolean choice network protocol. Otherwise Enter No and give valid static dns addresses. 148