D-Link DSR-1000AC Emulator - Page 118
net bandwidth profile delete, 6 net bandwidth traffic_selector add
View all D-Link DSR-1000AC manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 118 highlights
S.No Command Name Description Type and Description 11 Interface Enter WAN interface (WAN1/WAN2) for Outbound Policy and LAN/VLAN (Use show net bandwidth profile String interface_list command to see list)interface for Inbound Bandwidth Profile. 11.5 net bandwidth profile delete S.No Command Name Description 1 It allows to delete a bandwidth profile. Type and Description Unsigned integer 11.6 net bandwidth traffic_selector add S.No Command Name Description Type and Description 1 save Saves Traffic Selector configuration settings. Saves Traffic Selector 2 exit configuration settings and exit current mode. To revert to the previous 3 cancel Traffic Selector configuration settings. 4 profile_name Profile Name. String 5 service_name To see available services list by show command. String 6 match_type The match type can be IP or MAC Address. Traffic selector match type. 7 ip_address IP Address. IP address AAA.BBB.CCC.DDD where each part is in the range 0-255. 8 subnet_mask Subnet Mask. IP address AAA.BBB.CCC.DDD where each part is in the range 0-255. MAC address 9 mac_address MAC Address AA:BB:CC:DD:EE:FF where each part is in the range 00- FF. 10 port_name Port Name Traffic selectors Port types. 11 vlan_id Vlan ID Unsigned integer. 12 access_point Virtual Access Point Name String. 118