D-Link DSR-1000AC Emulator - Page 183

S.No Command Name Description Type and Description 10 AdvOtherConfigFlag Sets AdvOtherConfigFlag value. Boolean choice 11 AdvDefaultLifetime Sets AdvDefaultLifetime value. AdvDefaultLifetime range 12 AdvReachableTime Sets AdvReachableTime value. AdvReachableTime range 13 AdvRetransTimer Sets AdvRetransTimer value. AdvRetransTimer range 14 AdvLinkMTU Sets AdvLinkMTU value. AdvLinkMTU range 15 prefix Prefix to be advertised. IP address abcd:abcd:abcd:abcd:abcd:abc d:abcd:abcd where each part is in the range [0-9A-Fa-f:] 16 prefixLength Sets prefix length value. IPv6 Prefix length 17 AdvOnLink Sets AdvOnLink value. Boolean choice 18 AdvAutonomous Sets AdvAutonomous value. Boolean choice 19 AdvValidLifetime Sets AdvValidLifetime value. AdvValidLifetime range 20 AdvPreferredLifetim Sets AdvPreferredLifetime e value. AdvPreferredLifetime range 11.74 net ipv6_tunnel teredo configure S.No Command Name Description Type and Description 1 save Saves teredo Tunnel configuration settings. 2 exit Saves teredo Tunnel configurationsettings and exit current mode. 3 cancel To revert to the previous teredoTunnel configuration settings. Enables/disables teredo tunneling which will allow 4 teredo_tunneling_en able traffic from a LAN IPv6 network to be tunneled through a WAN IPv4 Boolean choice network to reach an IPV6 network. 5 primary_teredo_serv er Primary teredo server. String 6 secondary_teredo_s erver Secondary teredo server. String 183