D-Link DSR-1000AC Emulator - Page 135

S.No Command Name Description Type and Description 25 pppoe connectivity_type Enter the connectivity type. ISP Connectivity Types. 26 pppoe idletime Enter the idle time. Idle timeout value type. Enter Yes to get dns dynamically from ISP if you have not been assigned any static IP address. The 27 pppoe get_dns_from_isp ISP will automatically assign a DNS address to the router using PPPOE Boolean choice. network protocol. Otherwise Enter No and give valid static dns addresses. 28 pppoe primary_dns Valid primary DNS Server IP Address. IP address AAA.BBB.CCC.DDD where each part is in the range 0-255. 29 pppoe secondary_dns Valid secondary DNS Server IP Address. IP address AAA.BBB.CCC.DDD where each part is in the range 0-255. Enter Yes to get IP dynamically from ISP if you have not been assigned any static IP address. The 30 pppoe get_ip_from_isp ISP will automatically assign an IP address to the Boolean choice router using PPPOE network protocol. Otherwise Enter No and give valid static IP address. 31 pppoe static_ip Enter valid IP Address. IP address AAA.BBB.CCC.DDD where each part is in the range 0-255. IP address 32 pppoe subnet_mask Enter valid subnet mask. AAA.BBB.CCC.DDD where each part is in the range 0-255. 33 pppoe mac_type Selects the Mac Address Source. Types of mac address source MAC address 34 pppoe mac_address Enter valid MAC address. AA:BB:CC:DD:EE:FF where each part is in the range 00- FF. 35 pptp If ISP Type selected is PPTP, this field gives you options to configure PPTP credentials. 135