D-Link DSR-1000AC Emulator - Page 49
Command Name, Description, Type and Description
View all D-Link DSR-1000AC manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 49 highlights
S.No Command Name Description Type and Description 2 cancel To revert to the previous settings. 3 exit Saves l2tp server configuration settings, and exits current mode. 4 enable_v4 Enables/disables L2TP server in IPv4 mode only. Boolean choice 5 enable_v6 Enables/disables L2TP server in IPv4/IPv6 mode. Boolean choice 6 Routing_mode Select L2TP routing mode. Select Route Mode 7 start_address L2TP server starting IP address. IP address AAA.BBB.CCC.DDD where each part is in the range 0-255 8 end_address L2TP server ending IP address. IP address AAA.BBB.CCC.DDD where each part is in the range 0-255 9 ipv6_prefix L2TP server IPv6 Prefix. String 10 ipv6_prefix_length L2TP server IPv6 Prefix length. Unsigned integer 11 Authentication_type Selects the type of Authentication required. Authentication type 12 EnablePap Enables PAP authentication. Boolean choice 13 EnableChap Enables CHAP authentication. Boolean choice 14 EnableMSChap Enables MS-CHAP authentication. Boolean choice 15 EnableMSChapv2 Enables MS-CHAPv2 authentication. Boolean choice Enables/Disables support 16 l2tpSecretKeyEnabl for Secret Key, and enters e Secret Key if support is Boolean choice enabled. 17 secretKey Enter L2TP secret Key if Secret Key is enabled. String If there is no traffic from a 18 timeout user for more than the Radius client authentication specified time out, the timeout Type. connection is disconnected. 49