D-Link DSR-1000AC Emulator - Page 47
vpn gre_tunnel edit, 3 vpn gre_tunnel delete
![]() |
View all D-Link DSR-1000AC manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 47 highlights
6.2 vpn gre_tunnel edit S.No Command Name Description Type and Description 1 GRE Tunnel configuration mode Unsigned integer 2 save Saves system user configuration settings. 3 exit Saves system user configuration settings and exit current mode. 4 cancel To revert to the previous settings. 5 tunnelname Enter the Tunnel Name here. String 6 ipaddress Enter here. the tunnel IP Address IP address AAA.BBB.CCC.DDD where each part is in the range 0-255 7 subnet_mask Enter the tunnel Subnet Mask here. IP address AAA.BBB.CCC.DDD where each part is in the range 0-255 8 interface Enter the Interface on which the tunnel is established on. WAN interface type 9 remote_ip Enter the Remote IP to which the tunnel is being established here. IP address AAA.BBB.CCC.DDD where each part is in the range 0-255 10 ddp_broadcast Select enable/disable DDP packet forwarding on the Boolean choice tunnel here. 11 route_network Enter the destination network of GRE tunnel here. IP address AAA.BBB.CCC.DDD where each part is in the range 0-255 12 route_netmask Enter the subnet mask of destination network here. IP address AAA.BBB.CCC.DDD where each part is in the range 0-255 13 gateway Enter the gateway of the destination network here. IP address AAA.BBB.CCC.DDD where each part is in the range 0-255 6.3 vpn gre_tunnel delete S.No Command Name Description Type and Description 1 GRE Tunnel delete mode Unsigned integer 47
![](/manual_guide/products/dlink-dsr1000ac-emulator-7214be4/47.png)