D-Link DSR-1000AC Emulator - Page 166

S.No Command Name Description 15 pppoe username Enter the username to authenticate. Type and Description String 16 pppoe password Enter the password to authenticate. String 17 pppoe authOpt Enter the Auth Option to authenticate. PPPOE Authentication Types. Enter the dhcpv6 option for 18 pppoe dhcpv6_opt configuring additional WAN interface type parameters. IP address 19 pppoe primary_dns Valid primary DNS Server IP Address. abcd:abcd:abcd:abcd:abcd:abc d:abcd:abcd where each part is in the range [0-9A-Fa-f:] 20 pppoe secondary_dns Valid secondary DNS Server IP Address. IP address abcd:abcd:abcd:abcd:abcd:abc d:abcd:abcd where each part is in the range [0-9A-Fa-f:] 11.42 net routing ospfv2 configure S.No Command Name Description Type and Description 1 Ospfv2 configuration mode. OSPF Interfaces type 2 save Saves OSPFv2 configuration settings. Saves OSPFv2 3 exit configuration settings and exit current mode. 4 cancel To revert to the previous configuration settings. 5 enable Enables/Disables OSPFv2 for a particular interface. Boolean choice 6 area Gives the area to which interface belongs. the Unsigned integer Helps to determine the OSPFv2 designated router for a network. The router with the highest priority will 7 priority be more eligible to become Designated Router. Setting Unsigned integer the value to 0, makes the router ineligible to be come Designated Router. The default value is 1. 166