D-Link DSR-1000AC Emulator - Page 196
security firewall ipv4, default_outbound_policy
View all D-Link DSR-1000AC manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 196 highlights
S.No Command Name Description Type and Description 19 destination_address _start IP of the Destination user. IP address AAA.BBB.CCC.DDD where each part is in the range 0-255. 20 destination_address _end IP of the Destination user. IP address AAA.BBB.CCC.DDD where each part is in the range 0-255 21 qos_priority Firewall type of service. firewall type of service 22 wan_interface WAN interface for Source NAT settings. WAN interface type IP address 23 snat_address IP of the SNAT Address. AAA.BBB.CCC.DDD where each part is in the range 0-255 24 alias_SNAT_ipaddre ss Set Ip to use alias Internal_Interface firewall. as for IP address AAA.BBB.CCC.DDD where each part is in the range 0-255 25 dnat_port The port number to use for DNAT, required if port Port number forwarding is enabled. Enables/disables port 26 port_forwarding_ena forwarding based on this ble firewall rule configuration Boolean choice settings. Sends to Local Server 27 internal_ip_address (DNAT IP), Specifies an IP address and port number of a machine on the Local Network which is hosting IP address AAA.BBB.CCC.DDD where each part is in the range 0-255 the server. Sets it as 28 dnat_ipaddress Dedicated/configured WAN/3G WAN. WAN interface type 29 alias_DNAT_ipaddre ss Sets Ip to use alias as External_Interface for firewall. IP address AAA.BBB.CCC.DDD where each part is in the range 0-255 12.10 security firewall ipv4 default_outbound_policy S.No Command Name Description 1 Firewall Settings, Default Outbound Policy configuration mode. Type and Description Boolean choice 196