D-Link DSR-1000AC Emulator - Page 123
net lan ipv4 con
![]() |
View all D-Link DSR-1000AC manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 123 highlights
S.No Command Name Description 6 native-vlan Enables/Disables native VLAN status. 7 vlanid Sets VLAN Id. Type and Description Boolean choice Unsigned integer 11.16 net lan ipv4 configure S.No Command Name Description Type and Description 1 save Saves LAN configuration settings. 2 exit Saves LAN configuration settings and exit current mode. 3 cancel To revert to the previous LAN configuration settings. 4 static Configures LAN Settings. 5 static address Sets system LAN IP address. IP address AAA.BBB.CCC.DDD where each part is in the range 0-255 6 static subnet_mask Sets system LAN subnet mask. IP address AAA.BBB.CCC.DDD where each part is in the range 0-255 7 dhcp Configures DHCP Settings. 8 dhcp mode Sets dhcp mode. dhcpv4 modes 9 dhcp start_address Sets dhcp servers start address. IP address AAA.BBB.CCC.DDD where each part is in the range 0-255 10 dhcp end_address Sets dhcp servers end address. IP address AAA.BBB.CCC.DDD where each part is in the range 0-255 IP address 11 dhcp default_gw Sets dhcp default gateway. AAA.BBB.CCC.DDD where each part is in the range 0-255 IP address 12 dhcp primary_dns Sets primary dns server. AAA.BBB.CCC.DDD where each part is in the range 0-255 IP address 13 dhcp secondary_dns Sets secondary dns server. AAA.BBB.CCC.DDD where each part is in the range 0-255 IP address 14 dhcp wins_server Sets Wins Server address. AAA.BBB.CCC.DDD where each part is in the range 0-255 15 dhcp lease_time Sets system Lease Time. Number in range of 1 to 262800. 123
![](/manual_guide/products/dlink-dsr1000ac-emulator-7214be4/123.png)