D-Link DSR-1000AC Emulator - Page 195

12.9 security firewall ipv4 configure S.No Command Name Description Type and Description 1 save Saves Firewall IPV4 rules configuration settings. 2 exit Saves Firewall IPV4 rules configuration settings and exit current mode. 3 cancel To revert to the previous IPV4 rules configuration settings. 4 from_zone Sets from Zone security type. firewall rule type Sets From Zone VLAN 5 from_zone_vlan using corresponding VLAN String name. 6 to_zone Sets to Zone security type Firewall rule type. 7 to_zone_vlan Sets To Zone VLAN using corresponding VLAN name String 8 service . Name of the custom 9 service service_custom service for which a rule is to be added. Custom name String should already be added into custom service 10 service service_normal Name which of the a rule service is to be for added. Service type. 11 action Action to be taken by the rule. Firewall rule action type. 12 schedule Name which of schedule for the rule is applicable. String. 13 source_address_typ e Type of the source user. Firewall rule address type. 14 destination_address Type of the destination _type user. Firewall rule address type. 15 snat_address_type Type of the SNAT address. Firewall rule snat address type. 16 log Log Always or Never Firewall rule log enable/disable. 17 source_address_sta rt IP of the Source user. IP address AAA.BBB.CCC.DDD where each part is in the range 0-255. 18 source_address_en d IP of the Source user. IP address AAA.BBB.CCC.DDD where each part is in the range 0-255. 195