D-Link DSR-1000AC Emulator - Page 173
net radvd pool add
![]() |
View all D-Link DSR-1000AC manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 173 highlights
S.No Command Name Description Type and Description unsolicited multicast RA's. The default is 30 seconds. 7 flags RA Flags Selects Managed to use 8 flags managed_enable the administered /stateful protocol for address auto Boolean choice configuration. The Other flag is selected the host uses 9 flags other_enable administered/stateful protocol of other (i.e. non- Boolean choice address) information auto configuration. 10 preference Selects low/medium/high for the preference associated with this router's Radvd preference type. RADVD process. 11 mtu This is used in RA’s to ensure all nodes on the network value in use the same MTU the cases where Mtu size. the LAN MTU is not well known. The default is 1500. The lifetime in seconds of 12 life_time the route. The default is Unsigned integer. 3600 seconds. 11.50 net radvd pool add S.No Command Name Description Type and Description 1 save Saves radvd Pool configuration settings. Saves radvd Pool 2 exit configuration settings and exit current mode. 3 cancel To revert to the previous radvd Pool configuration settings. 4 prefix_type Option whether to select the prefix type as 6to4 or Ipv6 prefix type. Global/Local/ISATAP. 5 sla_id The SLA ID (Site-Level Aggregation Identifier) in the 6to4 address prefix is Unsigned integer. set to the interface ID of the 173
![](/manual_guide/products/dlink-dsr1000ac-emulator-7214be4/173.png)