D-Link DSR-1000AC Emulator - Page 198
security firewall ipv4 enable
View all D-Link DSR-1000AC manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 198 highlights
S.No Command Name Description Type and Description 20 destination_address _start IP of the Destination user. IP address AAA.BBB.CCC.DDD where each part is in the range 0-255. 21 destination_address _end IP of the Destiation user. IP address AAA.BBB.CCC.DDD where each part is in the range 0-255. 22 qos_priority Firewall type of service. Firewall type of service. 23 wan_interface WAN interface for Source NAT settings. WAN interface type. IP address 24 snat_address IP of the SNAT Address. AAA.BBB.CCC.DDD where each part is in the range 0-255. 25 alias_SNAT_ipaddre ss Sets Ip to use alias as Internal_Interface for firewall. IP address AAA.BBB.CCC.DDD where each part is in the range 0-255. 26 dnat_port The port number to use for DNAT, required if port Port number. forwarding is enabled. Enables/disables port 27 port_forwarding_ena forwarding based on this ble firewall rule configuration Boolean choice. settings. Send to Local Server 28 internal_ip_address (DNAT IP), Specifies an IP address and port number of a machine on the Local Network which is hosting IP address AAA.BBB.CCC.DDD where each part is in the range 0-255. the server. Sets it as 29 dnat_ipaddress Dedicated/configured WAN/3G WAN. WAN interface type. 30 alias_DNAT_ipaddr ess Sets Ip to use alias as External_Interface for firewall. IP address AAA.BBB.CCC.DDD where each part is in the range 0-255. 12.12 security firewall ipv4 enable S.No Command Name Description Type and Description 1 Enables Firewall IPv4 configuration mode. rules Unsigned integer 198