D-Link DSR-1000AC Emulator - Page 57
AAA.BBB.CCC.DDD where
![]() |
View all D-Link DSR-1000AC manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 57 highlights
S.No Command Name Description Type and Description 3 exit Saves pptp server configuration settings, and exits current mode. 4 enable_v4 Enables/disables PPTP server in IPv4 mode only. Boolean choice 5 enable_v6 Enables/disables PPTP server in IPv4/IPv6 mode. Boolean choice 6 Routing_Mode Selects Routing mode. Select Route Mode 7 start_address PPTP server starting IP address. IP address AAA.BBB.CCC.DDD where each part is in the range 0-255 8 end_address PPTP server ending IP address. IP address AAA.BBB.CCC.DDD where each part is in the range 0-255 9 ipv6_prefix PPTP server IPv6 Prefix. String 10 ipv6_prefix_length PPTP server IPv6 Prefix length. Unsigned integer 11 Authentication_type Selects the type of authentication required. Authentication type 12 pap_enable Enables support for PAP authentication method. Boolean choice 13 chap_enable Enables support for CHAP authentication method. Boolean choice Enables support for MS- 14 mschap_enable CHAP authentication Boolean choice method. Enables support for MS15 mschapv2_enable CHAPv2 authentication Boolean choice method. 16 Mppe40Enable Enables Mppe 40 bit encryption Boolean choice 17 Mppe128Enable Enables Mppe 128 bit encryption Boolean choice 18 MppeStatefulEnable Enables Stateful encryption Mppe Boolean choice 19 UserTimeOut The specified time after which the connection is disconnected. Radius client authentication timeout Type. 20 Enable_Netbios Enables/Disables the Netbios functionality. Boolean choice 21 Primary_Wins_Serv Enter primary Windows er server ip Address here. IP address AAA.BBB.CCC.DDD where each part is in the range 0-255. 57
![](/manual_guide/products/dlink-dsr1000ac-emulator-7214be4/57.png)