Dell Brocade 1020 Brocade Adapters Installation and Reference Manual - Page 135
Confirming driver installation with VMware tools, Fibre Channel: Brocade Communications Systems, Inc.
View all Dell Brocade 1020 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 135 highlights
Confirming driver package installation 3 Confirming driver installation with VMware tools Verify if the driver installed successfully using the following commands: • The following commands print the names of the Brocade storage driver (bfa) if installed. - For ESX 4.0 and 4.1 systems # rpm -qa|grep -i bfa - For ESX 5.0 systems esxcli software vib list | grep bfa • These commands print the names of the Brocade network driver (bna) if installed. - For ESX 4.0 and 4.1 systems # rpm -qa|grep -i bna - For ESX 5.0 systems esxcli software vib list | grep bfa • This command lists loaded modules. esxcfg-module -l For the storage driver, verify that an entry for bfa exists and that the ID loaded. For the network driver, verify that an entry for bna exists and that the ID loaded. • This command displays the latest versions of installed drivers for ESX 4.X systems. cat /proc/vmware/version For the storage driver, verify that an entry for bfa exists. For the network driver, verify that an entry for bna exists. • These commands display the latest versions of installed drivers for ESX 5.0 systems esxcli software vib list | grep bfa esxcli software vib list | grep bna • This command prints the names of the Brocade adapter storage driver package (bfa) if installed. rpm -qa|grep -i bfa • This command prints the names of the Brocade adapter network driver package (bna) if installed. rpm -qa|grep -i bna • This utility displays information about all PCI buses in the system and all devices connected to them. Fibre Channel: Brocade Communications Systems, Inc. displays for an HBA or Fabric Adapter port configured in HBA mode. Fibre Channel: Brocade Communications Systems, Inc. and Ethernet Controller display for a CNA or Fabric Adapter port configured in CNA or NIC mode if driver packages have correctly loaded. # lspci • This command displays information about all loaded modules. If bfa appears in the list, the storage driver is loaded to the system. If bna appears in the list, the network driver is loaded to the system. Brocade Adapters Installation and Reference Manual 107 53-1002144-01