Dell Brocade 1020 Brocade Adapters Installation and Reference Manual - Page 85

Store the mounting bracket that you removed for future use., on for procedures.

Get Dell Brocade 1020 PDF manuals and user guides View all Dell Brocade 1020 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 85 highlights

Stand-up adapters 2 8. Install the longer, standard bracket on the adapter if the low-profile mounting bracket (shipped installed on adapter) does not fit your system case. Use the following steps. If the installed low-profile bracket works, go on to step 9. a. Remove all SFP transceivers from the adapter. Refer to "Removing and installing SFP transceivers" on page 59 for procedures. b. Remove the two screws attaching the bracket to the adapter, and pull off the bracket. Refer to Figure 8. FIGURE 8 Removing or installing adapter mounting bracket c. Carefully guide the new mounting bracket onto the adapter, making sure the bracket mounting tabs align with the holes in the adapter. d. Replace and tighten the two screws. e. Store the mounting bracket that you removed for future use. 9. Insert the adapter into the desired empty PCIe bus slot. Press firmly until the adapter seats. Refer to Figure 9 for seating directions. Brocade Adapters Installation and Reference Manual 57 53-1002144-01

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
  • 174
  • 175
  • 176
  • 177
  • 178
  • 179
  • 180
  • 181
  • 182
  • 183
  • 184
  • 185
  • 186
  • 187
  • 188
  • 189
  • 190
  • 191
  • 192
  • 193
  • 194
  • 195
  • 196
  • 197
  • 198
  • 199
  • 200
  • 201
  • 202
  • 203
  • 204
  • 205
  • 206
  • 207
  • 208
  • 209
  • 210
  • 211
  • 212
  • 213
  • 214
  • 215
  • 216
  • 217
  • 218
  • 219
  • 220
  • 221
  • 222
  • 223
  • 224
  • 225
  • 226
  • 227
  • 228
  • 229
  • 230
  • 231
  • 232
  • 233
  • 234
  • 235
  • 236
  • 237
  • 238
  • 239
  • 240
  • 241
  • 242
  • 243
  • 244
  • 245
  • 246
  • 247
  • 248
  • 249
  • 250
  • 251
  • 252
  • 253
  • 254
  • 255
  • 256
  • 257
  • 258
  • 259
  • 260
  • 261
  • 262
  • 263
  • 264
  • 265
  • 266
  • 267
  • 268
  • 269
  • 270
  • 271
  • 272
Brocade Adapters Installation and Reference Manual
57
53-1002144-01
Stand-up adapters
2
8.
Install the longer, standard bracket on the adapter if the low-profile mounting bracket (shipped
installed on adapter) does not fit your system case. Use the following steps. If the installed
low-profile bracket works, go on to
step 9
.
a.
Remove all SFP transceivers from the adapter. Refer to
“Removing and installing SFP
transceivers”
on page 59 for procedures.
b.
Remove the two screws attaching the bracket to the adapter,
and pull off the bracket
. Refer
to
Figure 8
.
FIGURE 8
Removing or installing adapter mounting bracket
c.
Carefully guide the new mounting bracket onto the adapter, making sure the bracket
mounting tabs align with the holes in the adapter.
d.
Replace and tighten the two screws.
e.
Store the mounting bracket that you removed for future use.
9.
Insert the adapter into the desired empty PCIe bus slot. Press firmly until the adapter seats.
Refer to
Figure 9
for seating directions.