Dell Inspiron 531S Owner's Manual - Page 122
Onboard, Devices, Integrated Audio, If you removed a sound card - sound drivers
View all Dell Inspiron 531S manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 122 highlights
6 If you are removing the card permanently, install a filler bracket in the empty card-slot opening. NOTE: Installing filler brackets over empty card-slot openings is necessary to maintain FCC certification of the computer. The brackets also keep dust and dirt out of your computer. 7 Fix the card retention bracket by pressing it down. NOTICE: To connect a network cable, first plug the cable into the network device and then plug it into the computer. 8 Replace the card retention bracket, ensuring that: • The guide clamp is aligned with the guide notch. • The tops of all cards and filler brackets are flush with the alignment bar. • The notch in the top of the card or filler bracket fits around the alignment guide. 9 Replace the computer cover, reconnect the computer and devices to electrical outlets, and then turn them on. 10 Remove the card's driver from the operating system. 11 If you removed a sound card: a Enter system setup (see "System Setup" on page 172), go to Onboard Devices and select Integrated Audio, and then change the setting to On. b Connect external audio devices to the audio connectors on the back panel of the computer (see "Back Panel Connectors" on page 19). 12 If you removed an add-in network connector: a Enter system setup (see "System Setup" on page 172), go to Onboard Devices and select Integrated NIC, and then change the setting to On. b Connect the network cable to the integrated connector on the back panel of the computer (see "Back Panel Connectors" on page 19). 122 Removing and Installing Parts