Dell Inspiron 531S Owner's Manual - Page 154
Installing the I/O Panel, Replace the computer cover see Replacing the Computer Cover
View all Dell Inspiron 531S manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 154 highlights
1 2 1 screw 2 I/O panel Installing the I/O Panel 1 Place the I/O panel into the slot. NOTICE: Take care not to damage the cable connectors and the cable routing clips when sliding the I/O panel into the computer. 2 Align and slide the I/O panel clamp in the I/O panel clamp slot. 3 Replace and tighten the screw that secures the I/O panel. 4 Reconnect the cables to the system board. 5 Replace the bezel (see "Replacing the Bezel" on page 124). 6 Replace the computer cover (see "Replacing the Computer Cover" on page 165). 7 Connect your computer and devices to an electrical outlet, and turn them on. 8 Verify that the computer works correctly by running the Dell Diagnostics (see "Dell Diagnostics" on page 84). 154 Removing and Installing Parts
154
Removing and Installing Parts
Installing the I/O Panel
1
Place the I/O panel into the slot.
NOTICE:
Take care not to damage the cable connectors and the cable routing clips
when sliding the I/O panel into the computer.
2
Align and slide the I/O panel clamp in the I/O panel clamp slot.
3
Replace and tighten the screw that secures the I/O panel.
4
Reconnect the cables to the system board.
5
Replace the bezel (see "Replacing the Bezel" on page 124).
6
Replace the computer cover (see "Replacing the Computer Cover" on
page 165).
7
Connect your computer and devices to an electrical outlet, and turn them on.
8
Verify that the computer works correctly by running the Dell Diagnostics
(see "Dell Diagnostics" on page 84).
1
screw
2
I/O panel
2
1