Dell Inspiron 8200 Owner's Manual - Page 107
Align the notch in the module with the slot in the center of
View all Dell Inspiron 8200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 107 highlights
securing clip memory module NOTICE: If you need to install memory modules in two connectors, install a memory module in the connector labeled "JDIM (DIMMA)" before you install a module in the connector labeled "JDIM2 (DIMMB)." 8 Ground yourself and install the new memory module: a Align the notch in the module with the slot in the center of the connector. b Slide the edge of the module firmly into the connector, and rotate the module down until you feel a click. If you do not feel the click, remove the module and reinstall it. HINT: If the memory module is not installed properly, the computer does not boot. No error message indicates this failure. 9 Replace the cover and screw(s). NOTICE: If the memor y module cover is difficult to close, remove the module and reinstall it. Forcing the cover to close may damage your computer. A dding and Repl aci ng Part s 107