Dell Inspiron 8200 Owner's Manual - Page 51
Enabling the Infrared Sensor, Infrared Data Port, Basic, Device Configuration, Disabled
View all Dell Inspiron 8200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 51 highlights
1 Pull the cap off the track stick. 2 Align the new cap over the square track stick post and gently press the cap down onto the post. NOTICE: The track stick can damage the display if it is not properly seated on the post. 3 Test the track stick to ensure that the cap is seated properly. Enabling the Infrared Sensor 1 Enter the system setup program: a Turn on your computer. b Press when the Dell™ logo appears. 2 Press until you locate Infrared Data Port under Basic Device Configuration. 3 Press the down-arrow key to highlight Disabled next to Infrared Data Port. HINT: You cannot use the infrared sensor when the computer is docked. S et ti n g U p a n d U s i n g Yo u r C o m p u te r 51
Setting Up and Using Your Computer
51
1
Pull the cap off the track stick.
2
Align the new cap over the square track stick post and gently press the
cap down onto the post.
NOTICE:
The track stick can damage the display if it is not properly seated
on the post.
3
Test the track stick to ensure that the cap is seated properly.
Enabling the Infrared Sensor
1
Enter the system setup program:
a
Turn on your computer.
b
Press
when the Dellâ„¢ logo appears.
HINT:
You cannot use the
infrared sensor when the
computer is docked.
2
Press
until you locate
Infrared Data Port
under
Basic
Device Configuration
.
3
Press the down-arrow key to highlight
Disabled
next to
Infrared Data
Port
.