Dell PowerEdge 2900 Hardware Owner's Manual (PDF) - Page 106
Installing the Control Panel Assembly
View all Dell PowerEdge 2900 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 106 highlights
Figure 3-32. Removing the Control Panel Assembly 3 4 2 1 8 5 6 7 1 display module screws (2) 4 control panel board 7 system chassis 2 display module 5 control panel cable 8 display module label 3 display module cable 6 screws (3) Installing the Control Panel Assembly The following procedure applies to either a rack or tower system. Figure 3-32 illustrates a control panel assembly in the rack orientation. 1 Insert the control panel assembly display module into the chassis cutout and secure with the two Torx screws. 2 Affix the control panel label to the display module. 3 Install the control panel board in the system chassis and secure with the three Phillips screws. See Figure 3-32. 4 Connect the display module ribbon cable to the control panel board. See Figure 3-32. 106 Installing System Components