Dell PowerEdge 2900 Hardware Owner's Manual (PDF) - Page 20
CPU # IERR, CPU # Thermtrip, CPU # Presence, E141C, CPU Mismatch, CPU Protocol, CPU Bus PERR, CPU Init - bios update
View all Dell PowerEdge 2900 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 20 highlights
Table 1-6. LCD Status Messages (continued) Code E1410 E1414 E1418 E141C E141F E1420 E1421 Text CPU # IERR CPU # Thermtrip CPU # Presence CPU Mismatch CPU Protocol CPU Bus PERR CPU Init Causes Corrective Actions Specified microprocessor is reporting a system error. See your system's Information Update Tech Sheet located on support.dell.com for the most current system information. If the problem persists, see "Getting Help" on page 147. Specified microprocessor is out of See "Troubleshooting System acceptable temperature range and Cooling Problems" on page 123. has halted operation. If the problem persists, ensure that the microprocessor heat sinks are properly installed. See "Troubleshooting the Microprocessors" on page 133. NOTE: The LCD continues to display this message until the system's power cord is disconnected and reconnected to the AC power source, or the SEL is cleared using either Server Assistant or the BMC Management Utility. See the Dell OpenManage Baseboard Management Controller User's Guide for information about these utilities. Specified processor is missing or See "Troubleshooting the bad, and the system is in an Microprocessors" on page 133. unsupported configuration Processors are in a configuration unsupported by Dell. Ensure that your processors match and conform to the type described in the Microprocessor Technical Specifications outlined in your system's Getting Started Guide. The system BIOS has reported a See "Getting Help" on page 147. processor protocol error. The system BIOS has reported a See "Getting Help" on page 147. processor bus parity error. The system BIOS has reported a See "Getting Help" on page 147. processor initialization error. 20 About Your System