Dell PowerEdge 2900 Hardware Owner's Manual (PDF) - Page 29
Gate A20 failure - for sale
View all Dell PowerEdge 2900 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 29 highlights
Table 1-7. System Messages (continued) Message FBD training error: The following branch has been disabled: Branch x Gate A20 failure General failure Invalid NVRAM configuration, Resource Re-allocated Keyboard Controller failure Manufacturing mode detected MEMBIST failure - The following DIMM/rank has been disabled by BIOS: DIMM x Rank y Memory address line failure at address, read value expecting value Causes The specified branch (channel pair) contains DIMMs that are incompatible with each other. Faulty keyboard controller; faulty system board. The operating system is unable to carry out the command. System detected and corrected a resource conflict. Corrective Actions Ensure that only Dell-qualified memory is used. Dell recommends purchasing memory upgrade kits directly from www.dell.com or your Dell sales agent to ensure compatibility. See "Getting Help" on page 147. This message is usually followed by specific information. Note the information and take the appropriate action to resolve the problem. No action is required. Faulty keyboard controller; faulty system board System is in manufacturing mode. Faulty memory module(s). See "Getting Help" on page 147. Reboot to take the system out of manufacturing mode. See "Troubleshooting System Memory" on page 124. Faulty or improperly installed memory See "Troubleshooting System Memory" modules. on page 124. Memory double word logic failure at address, read value expecting value Memory odd/even logic failure at address, read value expecting value Memory write/read failure at address, read value expecting value Memory tests terminated by POST memory test terminated by keystroke. pressing the spacebar. Information only. About Your System 29