Dell PowerEdge 2900 Hardware Owner's Manual (PDF) - Page 68
Expansion Cards, Installing an Expansion Card - pcie
View all Dell PowerEdge 2900 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 68 highlights
Expansion Cards Your system provides six full-length expansion card slots configured as follows: • Slot 1 and 2 are 64-bit, 133-MHz (3.3-V) PCI-X expansion slots. These slots will accommodate 133-MHz, 100-MHz, 66-Hz, and 33-MHz PCI cards and PCI-X cards. • Slot 3 is a x8 lane-width PCIe expansion slot. • Slots 4, 5, and 6 are x4 lane-width PCIe expansion slots. Figure 3-14 shows the relative locations of these expansion-card slots Figure 3-14. Expansion Slots Installing an Expansion Card CAUTION: Only trained service technicians are authorized to remove the system cover and access any of the components inside the system. See your Product Information Guide for complete information about safety precautions, working inside the computer, and protecting against electrostatic discharge. 1 Turn off the system and attached peripherals, and disconnect the system from the electrical outlet. 2 Open the system. See "Opening the System" on page 53. 3 Open the plastic expansion-card retainer adjacent to the back of the empty slot. See Figure 3-15. 68 Installing System Components