Dell PowerEdge 2900 Hardware Owner's Manual (PDF) - Page 23

SAS Cable FB, Mem Config Err - ram

Get Dell PowerEdge 2900 PDF manuals and user guides View all Dell PowerEdge 2900 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 23 highlights

Table 1-6. LCD Status Messages (continued) Code E1A14 E1A15 E1A16 E1A17 E1A18 E2010 E2011 E2012 E2013 E2014 E2015 E2016 Text Causes Corrective Actions SAS Cable A SAS cable A is unseated, missing, Check the cable connection to or bad. the SAS backplane. See "Cabling the SAS Backplane Boards" on page 99. SAS Cable B SAS cable B is unseated, missing, Check the cable connection to or bad. the SAS backplane. See "Cabling the SAS Backplane Boards" on page 99. SAS Cable FB Flex bay SAS cable is unseated, missing, or bad. Check the cable connection to the SAS backplane. See "Cabling the SAS Backplane Boards" on page 99. Pwr Cable FB Flex bay power cable is unseated, Check the power cable missing, or bad. connection to the flex bay backplane. See "Installing the 1x2 Flex Bay Drive Bracket" on page 95. PDB Ctrl Cable The power distribution board control cable is unseated, missing, or bad. Ensure that the power distribution board control cable is seated properly. If the problem persists, replace the power distribution board control cable. See "Installing the Power Distribution Board" on page 112. No Memory No memory is installed in the system. Install memory. See "Memory" on page 82. Mem Config Err Memory detected, but is not configurable. Error detected during memory configuration. See "Troubleshooting System Memory" on page 124. Unusable Memory Memory is configured, but not usable. Memory subsystem failure. See "Troubleshooting System Memory" on page 124. Shadow BIOS Fail The system BIOS failed to copy See "Troubleshooting System its flash image into memory. Memory" on page 124. CMOS Fail CMOS failure. CMOS RAM not See "Getting Help" on page 147. functioning properly. DMA Controller DMA controller failure. See "Getting Help" on page 147. Int Controller Interrupt controller failure. See "Getting Help" on page 147. About Your System 23

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
  • 174
  • 175
  • 176
  • 177
  • 178
  • 179
  • 180
  • 181
  • 182
About Your System
23
E1A14
SAS Cable A
SAS cable A is unseated, missing,
or bad.
Check the cable connection to
the SAS backplane. See "Cabling
the SAS Backplane Boards" on
page 99.
E1A15
SAS Cable B
SAS cable B is unseated, missing,
or bad.
Check the cable connection to
the SAS backplane. See "Cabling
the SAS Backplane Boards" on
page 99.
E1A16
SAS Cable FB
Flex bay SAS cable is unseated,
missing, or bad.
Check the cable connection to
the SAS backplane. See "Cabling
the SAS Backplane Boards" on
page 99.
E1A17
Pwr Cable FB
Flex bay power cable is unseated,
missing, or bad.
Check the power cable
connection to the flex bay
backplane. See "Installing the 1x2
Flex Bay Drive Bracket" on
page 95.
E1A18
PDB Ctrl Cable
The power distribution board
control cable is unseated,
missing, or bad.
Ensure that the power
distribution board control cable is
seated properly. If the problem
persists, replace the power
distribution board control cable.
See "Installing the Power
Distribution Board" on page 112.
E2010
No Memory
No memory is installed in the
system.
Install memory. See "Memory" on
page 82.
E2011
Mem Config Err
Memory detected, but is not
configurable. Error detected
during memory configuration.
See "Troubleshooting System
Memory" on page 124.
E2012
Unusable Memory
Memory is configured, but not
usable. Memory subsystem
failure.
See "Troubleshooting System
Memory" on page 124.
E2013
Shadow BIOS Fail
The system BIOS failed to copy
its flash image into memory.
See "Troubleshooting System
Memory" on page 124.
E2014
CMOS Fail
CMOS failure. CMOS RAM not
functioning properly.
See "Getting Help" on page 147.
E2015
DMA Controller
DMA controller failure.
See "Getting Help" on page 147.
E2016
Int Controller
Interrupt controller failure.
See "Getting Help" on page 147.
Table 1-6.
LCD Status Messages
(continued)
Code
Text
Causes
Corrective Actions