Dell PowerEdge 2900 Hardware Owner's Manual (PDF) - Page 69
Align the expansion card with the card-edge guides and insert the expansion card firmly into
View all Dell PowerEdge 2900 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 69 highlights
Figure 3-15. Installing and Removing Expansion Cards 2 3 1 1 card-edge guide 2 expansion card 3 expansion-card retainer 4 Remove the filler bracket on the slot you will be using. NOTE: Keep this bracket if you need to remove the expansion card. Filler brackets must be installed over empty expansion-card slots to maintain Federal Communications Commission (FCC) certification of the system. The brackets also keep dust and dirt out of the system and aid in proper cooling and airflow inside the system. 5 Align the expansion card with the card-edge guides and insert the expansion card firmly into the expansion-card connector until the card is fully seated. NOTE: Ensure that the expansion-card bracket is also inserted into the securing slot on the back of the expansion-card cage. 6 Close the expansion-card retainer. See Figure 3-15. 7 Connect any internal or external cable(s) to the expansion card. 8 Close the system. See "Closing the System" on page 53. Installing System Components 69