Dell PowerEdge 2900 Hardware Owner's Manual (PDF) - Page 67
emove the fan from the bracket by squeezing the release handles on top of the fan and pulling
View all Dell PowerEdge 2900 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 67 highlights
4 Remove the fan from the bracket by squeezing the release handles on top of the fan and pulling the fan out of the bracket. See Figure 3-13. NOTICE: Do not remove more than one fan from the system at a time and do not operate the system with any fan removed for an extended period of time. Overheating can occur resulting in a system shutdown and loss of data. 5 Replace the fan. 6 Rotate the fan bracket toward the shroud and slightly squeeze the side tabs so that the tabs enter the latch slots. 7 Close the system. See "Closing the System" on page 53. 8 Replace the front bezel, if removed. Figure 3-13. Removing and Replacing the Cooling Shroud Fan 1 2 3 5 1 fan 4 fan bracket latch (2) 4 2 fan release latch (2) 5 fan bracket 3 cooling shroud Installing System Components 67