Dell PowerEdge R7525 EMC Installation and Service Manual - Page 127
Installing an expansion card into the expansion card riser
![]() |
View all Dell PowerEdge R7525 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 127 highlights
Figure 87. Removing expansion card from the expansion card riser 4. If the expansion card is not going to be replaced, install a filler bracket and close the card retention latch. Figure 88. Installing the filler bracket Next steps 1. If applicable, install an expansion card into the expansion card riser. Installing an expansion card into the expansion card riser Prerequisites 1. Follow the safety guidelines listed in the Safety instructions on page 40. 2. Follow the procedure listed in Before working inside your system on page 41. 3. If installing a new expansion card, unpack it and prepare the card for installation. NOTE: For instructions, see the documentation accompanying the card. Steps 1. Pull and lift up the expansion card retention latch lock to open. Installing and removing system components 127
![](/manual_guide/products/dell-poweredge-r7525-emc-installation-service-manual-faf6127/127.png)