Dell PowerEdge R7525 EMC Installation and Service Manual - Page 88
Processor and heat sink, Removing a heat sink
![]() |
View all Dell PowerEdge R7525 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 88 highlights
CAUTION: Do not apply pressure at the center of the memory module; apply pressure at both ends of the memory module evenly. CAUTION: To prevent damage to the memory module or the memory module socket during installation, do not bend or flex the memory module; insert both ends of the memory module simultaneously. 4. Press the memory module with your thumbs until the ejectors firmly click into place. When the memory module is properly seated in the socket, the levers on the memory module socket align with the levers on the other sockets that have memory modules installed. Figure 69. Installing a memory module Next steps 1. If removed, install the air shroud. 2. Follow the procedure listed in After working inside your system on page 41. 3. To verify if the memory module has been installed properly, press F2 and navigate to System Setup Main Menu > System BIOS > Memory Settings. In the Memory Settings screen, the System Memory Size must reflect the updated capacity of the installed memory. 4. If the System Memory Size is incorrect, one or more of the memory modules may not be installed properly. Ensure that the memory modules are firmly seated in their sockets. 5. Run the system memory test in system diagnostics. Processor and heat sink Removing a heat sink Prerequisites 1. Follow the safety guidelines listed in the Safety instructions on page 40. 2. Follow the procedure listed in the Before working inside your system on page 41. 3. If installed, remove the air shroud. WARNING: The heat sink and processor are too hot to touch for some time after the system has been powered off. Allow the heat sink and processor to cool down before handling them. 88 Installing and removing system components
![](/manual_guide/products/dell-poweredge-r7525-emc-installation-service-manual-faf6127/88.png)