Dell PowerEdge R7525 EMC Installation and Service Manual - Page 44
Installing the system cover
![]() |
View all Dell PowerEdge R7525 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 44 highlights
Figure 20. Removing the system cover Next steps 1. Replace the system cover. Installing the system cover Prerequisites 1. Follow the safety guidelines listed in the Safety instructions on page 40. 2. Follow the procedure listed in Before working inside your system on page 41. 3. Ensure that all internal cables are connected and routed properly, and no tools or extra parts are left inside the system. Steps 1. Align the tabs on the system cover with the guide slots on the system and slide the system cover. 2. Close the system cover release latch. 3. Using a 1/4-inch flat head or Phillips #2 screwdriver, rotate the lock clockwise to the lock position. 44 Installing and removing system components
![](/manual_guide/products/dell-poweredge-r7525-emc-installation-service-manual-faf6127/44.png)
Figure 20. Removing the system cover
Next steps
1.
Replace the system cover
.
Installing the system cover
Prerequisites
1.
Follow the safety guidelines listed in the
Safety instructions
on page 40.
2.
Follow the procedure listed in
Before working inside your system
on page 41.
3.
Ensure that all internal cables are connected and routed properly, and no tools or extra parts are left inside the system.
Steps
1.
Align the tabs on the system cover with the guide slots on the system and slide the system cover.
2.
Close the system cover release latch.
3.
Using a 1/4-inch flat head or Phillips #2 screwdriver, rotate the lock clockwise to the lock position.
44
Installing and removing system components